Powerflex Bushings Rear Stabilizer Bar Outer Bush Peugeot 206 (2 Pieces)

Road Serie - for on- and off-road use

The products in the Road Serie range are made from polyurethane. This is a specialized plastic that has been around for some thirty years. Advances have enabled us to endow this material with special properties. Suspension parts are among the most highly stressed components on a car, and are subject to enormous stress.

Originally, these parts were made from rubber containing products that deteriorate with age. Eventually, the vehicle moves more and more, offering less and less control over suspension geometry.

This leads to accelerated tire wear, braking instability and poor roadholding.

So Powerflex created the material to overcome these problems. They have designed a polyurethane compound that makes it possible to manufacture parts 25% to 30% stiffer than older rubber products, while retaining exactly the same noise-absorbing properties.

Why choose products from the Powerflex Road Serie range?

The benefits :

-Better road holding

-Improved chassis performance

- control over the amount of unwanted flex in the suspension

-Better tire contact with the road

-Greater safety and performance

-Elimination of noise, vibration and harshness

-Longer tire life

- Increased safety



Note: the Road Serie range is ideal for tuned cars.

It's a good compromise between performance and comfort.

These Powerflex stabilizer bar silentblock kits for the Peugeot 206 are designed to replace the original ones if they fail due to wear. This polyurethane version, stiffer than the original rubber, will give your car better handling thanks to its extra rigidity.
They are ideal for vehicles with a lowered ride height, to compensate for additional stresses.

Features of the Powerflex silent block for 206 Peugeot

This kit mounts on the rear axle to improve the performance and handling of your 206 S16, RC or HDI. They enable the shock absorbers to work better with rigid bushes, and the difference will be felt when cornering at high speeds.

When disassembling, be sure to remove the original silentblock using a press, and fit the new one as indicated in the instructions, to avoid parasitic vibrations. Contact your garage if necessary. Take the opportunity to check the condition of the anti-roll bar and, if necessary, treat any traces of corrosion, and fit new nuts if those on the vehicle are too worn.
Don't hesitate to consult the rest of our range of original quality spare parts, with various models for sway bars (/anti-roll bars), torsion bars, steering knuckles, rear wishbones, upper links, engine blocks, etc.

It's also advisable to repeat the geometry and parallelism when modifications are made to the running gear, to ensure perfect adjustment of your suspension system and other variables such as camber.
These silentblocs in direct link with your stabilizer bar as well as your suspension arms and connecting rod will enable better work of the shock absorbers and reduced wear of moving parts, notably the bearings of the front axle but also the rear axle.

Fits on :

Peugeot 206, 206 HDI, 206 S16, 206 RC.