MOTUL 8100 X-CLEAN EFE 5W30 engine oil - 5L can

Gasoline and Diesel engine oil - Euro 4, 5 and 6 5w30
100% Synthetic

100% Synthetic high performance lubricant with high protection and energy saving properties.
Approved by BMW, GM-Opel and MERCEDES for its Extra Fuel Economy properties.
Specially designed for the latest generation of cars, equipped with gasoline or diesel engines, atmospheric or turbo or turbo, indirect or direct injection, meeting Euro 4, 5 or 6 pollution control standards, and requiring an oil either ACEA C3, i.e. high viscosity HTHS (>3.5 mPa.s) and "Mid SAPS", with reduced Sulphated Ash content (≤0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), i.e. ACEA C2, i.e. low friction, low HTHS (≥2.9 mPa.s) and "Mid SAPS".

Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standards.
Compatible for catalytic converters (CAT) and DPFs (Diesel Particulate Filters).

Some engines cannot use this type of oil, always check and consult the vehicle's service manual before use.

ACEA C2/C3 STANDARDS
API SERVICE SN
BMW LL-04 APPROVALS
GENERAL MOTORS GM dexos2™ (replaces GM-LL-A-025 & B-025) under N°D20247HE011
MERCEDES-BENZ MB-Approval 229.52
OPEL OV 040 1547 - D30
VAUXHALL OV 040 1547 - D30
VW 505 00 505 01
PERFORMANCE FIAT 9.55535-S1, FIAT 9.55535-S3

RECOMMENDATIONS HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUBARU, SUZUKI, TOYOTA

Can of 5 liters

Less detail

Motul 300ml fuel injector cleaner cleans efficiently deposits and dirts in the injectors and engine fuel supply systems

Benefits :
Reduces injection system clogging and oxidation.
Eases cold start.
Reduces fuel consumption and pollutant emissions.

How to use it :
Pour all the bottle of MOTUL FUEL INJECTOR CLEANER directly in the fuel tank before fill up.

Less detail

Motul 300ml gasoline injector keep clean to mantain the cleanliness of fuel, pump, injector, carburetor systems and combustion chamber

Benefits :
Reduces deposits and oxidation of injector system.
Eases cold start.
Reduces fuel consumption and pollutant emissions.
Preserves engine power and performance.

How to use it :
Pour all the bottle in the fuel tank before fill up.

Less detail

Gasoline and Diesel engine oil - Euro 4, 5 and 6 5w30
100% Synthetic

100% Synthetic high performance lubricant with high protection and energy saving properties.
Approved by BMW, GM-Opel and MERCEDES for its Extra Fuel Economy properties.
Specially designed for the latest generation of cars, equipped with gasoline or diesel engines, atmospheric or turbo or turbo, indirect or direct injection, meeting Euro 4, 5 or 6 pollution control standards, and requiring an oil either ACEA C3, i.e. high viscosity HTHS (>3.5 mPa.s) and "Mid SAPS", with reduced Sulphated Ash content (≤0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), i.e. ACEA C2, i.e. low friction, low HTHS (≥2.9 mPa.s) and "Mid SAPS".

Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standards.
Compatible for catalytic converters (CAT) and DPFs (Diesel Particulate Filters).

Some engines cannot use this type of oil, always check and consult the vehicle's service manual before use.

ACEA C2/C3 STANDARDS
API SERVICE SN
BMW LL-04 APPROVALS
GENERAL MOTORS GM dexos2™ (replaces GM-LL-A-025 & B-025) under N°D20247HE011
MERCEDES-BENZ MB-Approval 229.52
OPEL OV 040 1547 - D30
VAUXHALL OV 040 1547 - D30
VW 505 00 505 01
PERFORMANCE FIAT 9.55535-S1, FIAT 9.55535-S3

RECOMMENDATIONS HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUBARU, SUZUKI, TOYOTA

Can of 5 liters

Less detail

MOTUL All in 1 Petrol is a complete multi-action petrol engine cleaner for use in all types of petrol engines, injection or carburettor, turbo or naturally aspirated, with or without catalytic converter or particle filter, using all types of petrol, leaded or unleaded, Ethanol, LPG and biofuels.

Gasoline additive compatible with E10 (Ethanol 10%).

It effectively cleans the deposits and fouling inherent in the operation of the engine's injectors and fuel supply systems thanks to its multi-action curative properties, thus limiting :
- Fouling of injectors and fuel system
- Condensation in the entire fuel system
- Gumming and varnishing in the injectors or carburettor
- Fouling of combustion chambers and intake valves

MOTUL All in 1 Petrol ensures perfect lubrication during the cleaning phase and prevents the deposit of loose micro-particles.
By removing deposits and fouling from valves, injectors and combustion chambers, it enables powerful combustion, restoring engine performance, reducing fuel consumption and lowering emissions of gases and particles.

The multi-action additive also protects the fuel system against corrosion, making it ideal for fuels with Ethanol (E5 & E10).

Directions for use :

Pour the entire bottle directly into the petrol tank before refuelling. Drive normally until all the fuel is used up, then the fuel system will be completely cleaned from the tank to the injector and combustion chamber.

One dose is sufficient for tanks up to 80 litres.

Do not exceed the prescribed dose. If necessary, use 2 successive treatments instead.

To maintain the benefits of the cleaning, use MOTUL All in 1 Petrol regularly afterwards.

Less detail

Gasoline and Diesel engine oil - Euro 4, 5 and 6 5w30
100% Synthetic

100% Synthetic high performance lubricant with high protection and energy saving properties.
Approved by BMW, GM-Opel and MERCEDES for its Extra Fuel Economy properties.
Specially designed for the latest generation of cars, equipped with gasoline or diesel engines, atmospheric or turbo or turbo, indirect or direct injection, meeting Euro 4, 5 or 6 pollution control standards, and requiring an oil either ACEA C3, i.e. high viscosity HTHS (>3.5 mPa.s) and "Mid SAPS", with reduced Sulphated Ash content (≤0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), i.e. ACEA C2, i.e. low friction, low HTHS (≥2.9 mPa.s) and "Mid SAPS".

Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standards.
Compatible for catalytic converters (CAT) and DPFs (Diesel Particulate Filters).

Some engines cannot use this type of oil, always check and consult the vehicle's service manual before use.

ACEA C2/C3 STANDARDS
API SERVICE SN
BMW LL-04 APPROVALS
GENERAL MOTORS GM dexos2™ (replaces GM-LL-A-025 & B-025) under N°D20247HE011
MERCEDES-BENZ MB-Approval 229.52
OPEL OV 040 1547 - D30
VAUXHALL OV 040 1547 - D30
VW 505 00 505 01
PERFORMANCE FIAT 9.55535-S1, FIAT 9.55535-S3

RECOMMENDATIONS HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUBARU, SUZUKI, TOYOTA

Can of 5 liters

Less detail

MOTUL all in 1 Diesel is a complete multi-action diesel injection system cleaner that can be used in all types of diesel engines, indirect or direct injection, atmospheric or turbo, with or without DPF (Diesel Particulate Filter), with or without SCR (Selective Catalyst Reduction), and using diesel or biodiesel fuel.

Diesel additive compatible with Biodiesels B7 (Biodiesel 7%) and B10 (Biodiesel 10%).

It effectively cleans deposits and fouling inherent in the operation of the engine's diesel fuel systems thanks to its multi-action curative properties thus limiting
- Fouling of injectors and fuel system
- Condensation in the entire fuel system
- Gumming and varnishing of injectors and injection pump
- Fouling of combustion chambers and intake valves

MOTUL All in 1 Diesel ensures perfect lubrication during the cleaning phase and prevents the deposition of loose micro-particles.
By removing deposits and fouling from valves, injectors and combustion chambers, it enables powerful combustion, restoring engine performance.

It also increases the cetane number of the fuel, allowing optimum combustion and reducing fuel consumption.

The multi-action additive is also formulated to facilitate the regeneration of the particulate filter, thus reducing gas and particulate emissions.
Protects diesel fuel from oxidation and thus prevents the formation of fuel system micro-organisms.

Directions for use :

Pour the entire bottle directly into the diesel tank before refuelling. Drive normally until all the fuel is used up, then the fuel system will be completely cleaned, from the tank to the injector and combustion chamber, and the particle filter.

One dose is sufficient for tanks up to 80 litres.

Do not exceed the prescribed dose. If necessary, apply 2 successive treatments.

To maintain the benefits of the cleaning, use MOTUL All in 1 Diesel regularly afterwards.

Less detail