SPEEDSOCKET socket

Changing a wheel in less than 20 seconds is entirely possible thanks to Speedsocket.

When you start unscrewing the nuts, the Speedsocket captures each nut in its socket, preventing the nuts from getting lost under the car.
Mounted on an impact spanner (1/2 inch square) it accumulates and redistributes the nuts (can be kept at full power as the internal mechanism prevents any cross-threading from occurring).
Once the first nut has been tightened, the next nut works its way to the front of the socket and is now ready to be screwed on again until the chamber is empty.
This makes it the fastest, most reliable and easiest way to remove and fit a wheel using a single set of nuts... that's the Speedsocket difference!

Whether to save precious time in the pits, or simply to make your life easier when changing your wheels.

Designed and manufactured 100% in Australia, this tool comes in a black Chromoly finish or a Carbon Pro version, with a choice of 2 socket diameters:

19mm SPEEDSOCKET for M12 nuts (1/2 inch drive with an external diameter measuring just 27.2 mm).

21mm SPEEDSOCKET for M14 nuts (1/2 inch drive with an external diameter measuring only 29.5 mm).

This makes it suitable for the majority of racing alloy rims, off-road alloy rims and steel rims, it's perfect for those quick pit stops with no special precautions to take!

19.5cm long socket

Specific SPEEDSOCKET nuts sold separately (see reference SPS-ECROU)

Speedsocket tools and nuts are only compatible with each other, do not use other types of sockets or nuts!