EVANS Coolant Oil Change Preparation 2L

EVANS hygroscopic preparatory liquid.

This liquid is made to clean all the cooling system to remove all the water present in the systems.
It can be use several times.
This Evans liquid prepares the cooling system to add the waterless coolant.

Capacity: 2L

Less detail

EVANS Vintage Cool Waterless Coolant for Pre-war Vehicles 2 Liters

Less detail

EVANS hygroscopic preparatory liquid.

This liquid is made to clean all the cooling system to remove all the water present in the systems.
It can be use several times.
This Evans liquid prepares the cooling system to add the waterless coolant.

Capacity: 2L

Less detail

This EVANS waterless coolant is the fruit of many decades of research and development.

The engineers had specially designed this coolant to maintain the engines at the right temperature in the hardest weather conditions (freezing point below -40°C).

The life-long coolant :

As well as improving your cooling system, the EVANS coolant allows to improve your engine lifespan. This protection will be effective all the life-long of your engine without be changed!!

Waterless - No overheating

The EVANS coolant boiling point is above 180°C.

Waterless - No corrosion

Because it's waterless, the EVANS coolant prevents and eliminates corrosion.

Waterless - Low pressure

The EVANS coolant allows to reduce the pressure in the cooling system.

Waterless - No limescale

By preventing limescale accumulation, the EVANS coolant avoids the transfer of inefficient heat.

USE:

It's important to read carefully the instructions below for the EVANS coolant proper functionning:

1/ Remove the actual coolant present in your cooling system including the one in your heat unity.

2/ Fill the system with the EVANS hygroscopic preparation liquid (Ref: EV-PREP-FLUID). This liquid allows to aliminate all pieces of dirt, limescale debris and other residues that may affect the proper functionning of the EVANS coolant.

3/ Start the engine to its normal functionning temperature and then, allow to cool. Drain again the cooling system.

4/ Fill the cooling system with the EVANS waterless coolant. Run the engine to its normal functionning temperature to expel all the air present in the system.

5/ After the first use, you have to check the coolant liquid level and complete if necessary.

Capacity: 2L

Less detail

EVANS hygroscopic preparatory liquid.

This liquid is made to clean all the cooling system to remove all the water present in the systems.
It can be use several times.
This Evans liquid prepares the cooling system to add the waterless coolant.

Capacity: 2L

Less detail

This EVANS waterless coolant is the fruit of many decades of research and development.

The engineers had specially designed this coolant to maintain the engines at the right temperature in the hardest weather conditions (freezing point below -40°C).

The life-long coolant :

As well as improving your cooling system, the EVANS coolant allows to improve your engine lifespan. This protection will be effective all the life-long of your engine without be changed!!

Waterless - No overheating

The EVANS coolant boiling point is above 180°C.

Waterless - No corrosion

Because it's waterless, the EVANS coolant prevents and eliminates corrosion.

Waterless - Low pressure

The EVANS coolant allows to reduce the pressure in the cooling system.

Waterless - No limescale

By preventing limescale accumulation, the EVANS coolant avoids the transfer of inefficient heat.

USE:

It's important to read carefully the instructions below for the EVANS coolant proper functionning:

1/ Remove the actual coolant present in your cooling system including the one in your heat unity.

2/ Fill the system with the EVANS hygroscopic preparation liquid (Ref: EV-PREP-FLUID). This liquid allows to aliminate all pieces of dirt, limescale debris and other residues that may affect the proper functionning of the EVANS coolant.

3/ Start the engine to its normal functionning temperature and then, allow to cool. Drain again the cooling system.

4/ Fill the cooling system with the EVANS waterless coolant. Run the engine to its normal functionning temperature to expel all the air present in the system.

5/ After the first use, you have to check the coolant liquid level and complete if necessary.

Capacity: 2L

Less detail