# Set of 2 Eibach Pro-Kit Rear Springs for Alfa Romeo 75 (162B) - Refurbished

> Set of 2 Eibach Pro-Kit rear springs for Alfa Romeo 75 (162B), 30 mm drop. Inspected remanufactured product, with some scratches.

- URL: https://www.gt2i.com/en/eibach-springs/224092-set-of-2-eibach-pro-kit-rear-springs-for-alfa-romeo-75-162b-refurbished-3666618852256.html
- Reference: EI-1004120-OC
- Price: €147.00
- Regular price: €210.00
- Brand: EIBACH
- Availability: in stock

## Description

Refurbished product
Product has been inspected and is fully functional, in good overall condition, with a few scratches visible in the photos. The packaging may be damaged, and the product may show signs of storage.
The two Eibach Pro-Kit rear springs for the Alfa Romeo 75 (162B) provide an approximately 30 mm rear reduction. They help reduce body movement and roll when cornering, while giving your Alfa Romeo a sportier ride height.
This set includes only the two rear axle springs. Since the Alfa Romeo 75 uses torsion bars in the front, lowering the front axle is achieved by adjusting these bars, not by replacing the front coil springs.
Specifications of the Eibach Pro-Kit springs for the Alfa Romeo 75
Brand: Eibach.
Range: Pro-Kit.
Kit part number: E1004-120.
GT2i part number for the remanufactured product: EI-1004120-OC.
Rear spring part number: F1004002.
Packaging: set of 2 rear springs.
Mounting position: rear axle.
Spring type: coilspring.
Rear reduction: approximately 30 mm.
Spring length: 405 mm.
Wire diameter: 13 mm.
Number of coil springs: 8.
Maximum allowable axle load: 850 kg.
Maximum allowable axle load per rear axle: 930 kg.
Application: vehicles with torsion bar front suspension, without a height adjuster.
Condition: refurbished, with a few scratches.
Vehicles compatible with the Eibach E1004-120 kit
Alfa Romeo 75 (162B), in the following versions and provided that the maximum axle loads are not exceeded:
1.6 — 103 ch: 05/1985–09/1989, type 162.B2.
1.6 — 110 ch: 05/1985–09/1989, types 162.B2B and 162.B2C.
1.6 with catalytic converter — 110 ch: 05/1989–02/1992, types 162.B2B and 162.B2C.
1.8 — 116 ch: 09/1985–06/1989, types 162.B1A and 162.B1B.
1.8 — 120 ch: 09/1988–02/1992, types 162.B1L and 162.B1F.
1.8 — 122 ch: 08/1989–02/1992, type 162.B1H.
1.8 Turbo — 150 ch: 09/1986–02/1992, types 162.B1C, 162.B1D, and 162.B1G.
1.8 Turbo i.e. — 155 ch: 02/1986–01/1990, type 162.B1E.
2.0 — 128 ch: May 1985–October 1988, type 162.BA.
2.0 Twin Spark — 146 ch: 01/1987–02/1992, types 162.4CB, 162.B4, and 162.B4A.
2.0 Twin Spark with catalytic converter — 148 ch: May 1985–February 1992, type 162.B4A.
2.5 V6 — 150 ch: May 1985–August 1986, type 162.B3.
3.0 V6 with catalytic converter — 185 ch: 01/1987–02/1992, type 162.B6A.
3.0 V6 — 192 ch: 02/1990–02/1992, type 162.B6C.
2.0 TD — 95 ch: 05/1985–09/1992, types 162.BD and 162.BG.
Mounting and Pre-Order Checks
Check the model of your Alfa Romeo 75, its date of manufacture, and the weight ratings indicated on its manufacturer’s plate. This kit is intended for vehicles without a ride height compensator.
The actual lowering may vary depending on the engine, equipment, and initial suspension height. On a vehicle already equipped with a factory-lowered sport chassis, the additional height reduction may be less than the advertised value.
Have both rear springs replaced at the same time and check the condition of the shock absorbers and spring seats. After mounting and, if necessary, adjusting the front torsion bars, have the vehicle’s alignment checked.
Key Features
Set of 2 rear springs: replace in pairs on the same axle.
Rear reduction in mm of approximately 30: sportier ride height.
Reduced body roll: better roll control when cornering.
Inspected, remanufactured product: fully functional despite a few scratches.

## Features

- Product type: Springs
- First word type: Springs