# ACL Connecting Rod Bushes - 0.010 inches (0.254 mm) - 4B2250-010

> ACL 4B2250-010 connecting rod bushes. Check the mounting dimensions and oil clearance during engine rebuild.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/184492-acl-connecting-rod-bushes-0010-inches-0254-mm-4b2250-010-3666618279855.html
- Reference: ACL-4B2250-010
- Price: €37.80
- Brand: ACL
- Availability: in stock

## Description

ACL 4B2250-010 connecting rod bushes correspond to the manufacturer’s part number specified for the engine in question. Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current identification does not allow it to be definitively assigned to the specific construction of the ACL Race Series versions without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
The 0.010-inch (0.254 mm) dimension must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Manufacturer Part Number: 4B2250-010
Dimension: 0.010 inches (0.254 mm)
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A replacement size should only be installed if the corresponding machining has been performed.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,94
- Width in mm: 20,06
- First word type: Bearing
- Rod Journal Diameter in mm: 47,41
- Rod Journal Diameter in mm: 47,39
- Max. connecting rod bore in mm: 51,35
- Min. connecting rod bore in mm: 51,33
