# ACL Connecting Rod Bushes - MINI 4-Cyl - 0.020 inches (0.508 mm) - 4B2201-020

> ACL 4B2201-020 connecting rod bushes for MINI 4-cylinder engines. Check the mounting dimensions and oil clearance during engine rebuild.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/184485-acl-connecting-rod-bushes-mini-4-cyl-0020-inches-0508-mm-4b2201-020-3666618279787.html
- Reference: ACL-4B2201-020
- Price: €35.30
- Brand: ACL
- Availability: out of stock

## Description

ACL 4B2201-020 connecting rod bushes correspond to the manufacturer’s part number specified for MINI (4CYL). Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current identification does not allow it to be definitively assigned to the specific construction of the ACL Race Series versions without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
The dimension of 0.020 inches (0.508 mm) must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Manufacturer Part Number: 4B2201-020
Dimension: 0.020 inches (0.508 mm)
Main engines: 4CYL
Manufacturers: MINI
Engine configurations compatible with ACL 4B2201-020 bearings
The engine types listed for this set include: 4CYL.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A replacement size should only be installed if the corresponding machining has been performed.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 2,08
- Width in mm: 22,35
- First word type: Bearing
- Make (Engine): Mini
- Rod Journal Diameter in mm: 40,79
- Rod Journal Diameter in mm: 40,78
- Max. connecting rod bore in mm: 44,98
- Min. connecting rod bore in mm: 44,97
