# ACL Connecting Rod Bushes - MINI - 0.020 inches (0.508 mm) - 4B2206-020

> ACL 4B2206-020 connecting rod bushes for MINI. Check the mounting dimensions and oil clearance during engine rebuild.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/184483-acl-connecting-rod-bushes-mini-0020-inches-0508-mm-4b2206-020-3666618279763.html
- Reference: ACL-4B2206-020
- Price: €36.40
- Brand: ACL
- Availability: out of stock

## Description

ACL 4B2206-020 connecting rod bushes correspond to the manufacturer’s part number specified for MINI. Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current identification does not allow it to be definitively assigned to the specific construction of the ACL Race Series versions without verification. It must be selected based on the dimensions of the crankshaft and the corresponding housings.
The dimension of 0.020 inches (0.508 mm) must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
Type: Connecting rod bushes
Manufacturer: ACL
Manufacturer Part Number: 4B2206-020
Dimension: 0.020 inches (0.508 mm)
Vehiclemanufacturers: MINI
Engine application
Verify that the engine and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Select the dimension based on the crankshaft measurements; then check the assembled bore with the cap tightened to the specified value. Bearing oiling depends on the resulting clearance. A replacement dimension should only be installed if the corresponding machining has been performed.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 2,08
- Width in mm: 21,59
- First word type: Bearing
- Make (Engine): Mini
- Rod Journal Diameter in mm: 43,97
- Rod Journal Diameter in mm: 43,95
- Max. connecting rod bore in mm: 48,16
- Min. connecting rod bore in mm: 48,15
