# ACL Race Series Connecting Rod Bushes - Toyota 3SGE and 3SGTE - STD - 4B8366HX-STD

> ACL Race Series 4B8366HX-STD Tri-Metal Connecting Rod Bushes for Toyota 3SGE | 3SGTE. STD size, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135554-acl-race-series-connecting-rod-bushes-toyota-3sge-and-3sgte-std-4b8366hx-std-3661768408841.html
- Reference: ACL-4B8366HX-STD
- Price: €71.00
- Brand: ACL
- Availability: in stock

## Description

The ACL Race Series 4B8366HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Toyota's 3SGE and 3SGTE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B8366HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats experience deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: Connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B8366HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: 3SGE and 3SGTE
Manufacturers: Toyota
Rod journal diameter (nominal dimension): 47.985 to 48 mm
Connecting rod top end bore: 51.004 to 51.024 mm
Maximum thickness at the top: 1.475 mm
Maximum width: 21.3 mm
Engine models compatible with ACL 4B8366HX-STD bearings
The engine models listed for this set include: 3S | 3SGE | 3SGTE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,48
- Width in mm: 21,30
- Engine code: 3S - 2.0L 16V
- First word type: Bearing
- Make (Engine): Toyota
- Rod Journal Diameter in mm: 48,00
- Rod Journal Diameter in mm: 47,99
- Max. connecting rod bore in mm: 51,02
- Min. connecting rod bore in mm: 51,00
