# ACL Race Series Connecting Rod Bushes - Toyota 1HZ - STD - 6B8396HX-STD

> ACL Race Series 6B8396HX-STD trimetal connecting rod bushes for Toyota 1HZ. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135485-acl-race-series-connecting-rod-bushes-toyota-1hz-std-6b8396hx-std-3661768412015.html
- Reference: ACL-6B8396HX-STD
- Price: €99.00
- Brand: ACL
- Availability: in stock

## Description

ACL Race Series 6B8396HX-STD connecting rod bushes with a trimetal structure are designed for Toyota 1HZ engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B8396HX-STD corresponds to the standard size (STD).
The trimetal structure of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical durability and bearing performance under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
Type: connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 6B8396HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: 1HZ
Manufacturers: Toyota
Rod journal diameter (nominal dimension): 58.995 to 59.005 mm
Connecting rod top end bore: 62.014 to 62.032 mm
Maximum thickness at the top: 1.476 mm
Maximum width: 23.55 mm
Engine configurations compatible with ACL 6B8396HX-STD bearings
The engine models listed for this set include: 1HZ.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,48
- Width in mm: 23,55
- First word type: Bearing
- Make (Engine): Toyota
- Rod Journal Diameter in mm: 59,01
- Rod Journal Diameter in mm: 59,00
- Max. connecting rod bore in mm: 62,03
- Min. connecting rod bore in mm: 62,01
