# ACL Race Series Connecting Rod Bushes - Toyota 1GR-FE and 1GR - STD - 6B8262HX-STD

> ACL Race Series 6B8262HX-STD Tri-Metal Connecting Rod Bushes for Toyota 1GR-FE | 1GR. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135476-acl-race-series-connecting-rod-bushes-toyota-1gr-fe-and-1gr-std-6b8262hx-std-3661768411926.html
- Reference: ACL-6B8262HX-STD
- Price: €103.00
- Brand: ACL
- Availability: out of stock

## Description

The ACL Race Series 6B8262HX-STD trimetal connecting rod bushes are designed for Toyota 1GR-FE and 1GR engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B8262HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 6B8262HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: 1GR-FE and 1GR
Manufacturers: Toyota
Rod journal diameter (nominal dimension): 55.992 to 56 mm
Connecting rod top end bore: 59 to 59.025 mm
Maximum thickness at the top: 1.479 mm
Maximum width: 16 mm
Engine models compatible with ACL 6B8262HX-STD bearings
The engine models listed for this set include: 1GR-FE | 1GR.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, controlled shell thickness, and a trimetal design optimized for mechanical strength and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,48
- Width in mm: 16,00
- First word type: Bearing
- Make (Engine): Toyota
- Rod Journal Diameter in mm: 56,00
- Rod Journal Diameter in mm: 55,99
- Max. connecting rod bore in mm: 59,03
- Min. connecting rod bore in mm: 59,00
