# ACL Race Series Connecting Rod Bushes - Porsche - STD - 6B2473HX-STD

> ACL Race Series 6B2473HX-STD trimetal connecting rod bushes for Porsche. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135386-acl-race-series-connecting-rod-bushes-porsche-std-6b2473hx-std-3661768411483.html
- Reference: ACL-6B2473HX-STD
- Price: €109.00
- Brand: ACL
- Availability: out of stock

## Description

The ACL Race Series 6B2473HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Porsche engines compatible with this family of bearings. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B2473HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
Type: connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 6B2473HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Manufacturers: Porsche
Rod journal diameter (nominal dimension): 54.971 to 54.99 mm
Connecting rod top end bore: 58 to 58.019 mm
Maximum thickness at the top: 1.486 mm
Maximum width: 14.8 mm
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Before assembly, verify the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,49
- Width in mm: 14,80
- First word type: Bearing
- Make (Engine): Porsche
- Rod Journal Diameter in mm: 54,99
- Rod Journal Diameter in mm: 54,97
- Max. connecting rod bore in mm: 58,02
- Min. connecting rod bore in mm: 58,00
