# ACL Race Series Connecting Rod Bushes - Nissan SR20DE - STD - 4B2960HX-STD

> ACL Race Series 4B2960HX-STD trimetal connecting rod bushes for the Nissan SR20DE. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135278-acl-race-series-connecting-rod-bushes-nissan-sr20de-std-4b2960hx-std-3661768408032.html
- Reference: ACL-4B2960HX-STD
- Price: €61.60
- Brand: ACL
- Availability: in stock

## Description

The ACL Race Series 4B2960HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Nissan SR20DE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B2960HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer Part Number: 4B2960HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: SR20DE
Manufacturers: Nissan
Rod journal diameter (nominal dimension): 47.956 to 47.974 mm
Connecting rod top end bore: 51 to 51.013 mm
Maximum thickness at the top: 1.49 mm
Maximum width: 17.1 mm
Engine models compatible with ACL 4B2960HX-STD bearings
The engine models listed for this set include: SR20DE | SR20DET.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for racing and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,49
- Width in mm: 17,10
- Engine code: SR20DE - 2.0L 16V
- Engine code: SR20DET - 2.0L 16V
- First word type: Bearing
- Make (Engine): Nissan
- Rod Journal Diameter in mm: 47,97
- Rod Journal Diameter in mm: 47,96
- Max. connecting rod bore in mm: 51,01
- Min. connecting rod bore in mm: 51,00
