# ACL Race Series Connecting Rod Bushes - Honda and Acura F20C and F22C - STD - 4B1912HX-STD

> ACL Race Series 4B1912HX-STD Tri-Metal Connecting Rod Bushes for Honda and Acura F20C | F22C. STD specification, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135119-acl-race-series-connecting-rod-bushes-honda-and-acura-f20c-and-f22c-std-4b1912hx-std-3661768407424.html
- Reference: ACL-4B1912HX-STD
- Price: €71.00
- Brand: ACL
- Availability: in stock

## Description

The ACL Race Series 4B1912HX-STD connecting rod bushes with a trimetal structure are designed for Honda and Acura F20C and F22C engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B1912HX-STD corresponds to the standard (STD) size.
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
Type: connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B1912HX-STD
Specification: standard specification (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: F20C and F22C
Manufacturers: Honda | Acura
Rod journal diameter (nominal dimension): 47.98 to 48 mm
Connecting rod top end bore: 51.004 to 51.024 mm
Maximum thickness at the top: 1.483 mm
Maximum width: 19.4 mm
Engine models compatible with ACL 4B1912HX-STD bearings
The engine models listed for this set include: H22 | F20C | F22C | F20C/22C with K24 Crank | H22A | H22Z.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,48
- Width in mm: 19,40
- Engine code: H22 - 2.2L 16V
- Engine code: F20C - 2.0L 16V
- Engine code: F22C - 2.2L 16V
- Engine code: F20C/22C with K24 Crank - 2.4L 16V
- First word type: Bearing
- Make (Engine): Honda
- Make (Engine): Acura
- Rod Journal Diameter in mm: 48,00
- Rod Journal Diameter in mm: 47,98
- Max. connecting rod bore in mm: 51,02
- Min. connecting rod bore in mm: 51,00
