# ACL Race Series Connecting Rod Bushes - Ford and Mazda DURATORQ - 0.25 mm - 4B2260H-.25

> ACL Race Series 4B2260H-.25 trimetal connecting rod bushes for Ford and Mazda DURATORQ. Thickness: 0.25 mm; suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/135074-acl-race-series-connecting-rod-bushes-ford-and-mazda-duratorq-025-mm-4b2260h-25-3661768407769.html
- Reference: ACL-4B2260H-025
- Price: €96.00
- Brand: ACL
- Availability: out of stock

## Description

ACL Race Series 4B2260H-.25 trimetal connecting rod bushes are designed for Ford and Mazda DURATORQ engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B2260H-.25 corresponds to a thickness of 0.25 mm.
ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
Type: Connecting rod bush
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B2260H-.25
Thickness: 0.25 mm
Version: H
Main engines: DURATORQ
Manufacturers: Ford | Mazda
Engine types compatible with ACL 4B2260H-.25 bearings
The engine types listed for this set include: DURATORQ | P4-AT.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,61
- Width in mm: 24,45
- First word type: Bearing
- Make (Engine): Ford
- Make (Engine): Mazda
- Rod Journal Diameter in mm: 52,75
- Rod Journal Diameter in mm: 52,73
- Max. connecting rod bore in mm: 56,02
- Min. connecting rod bore in mm: 56,00
