# ACL Race Series Connecting Rod Bushes - MINI 4-CYL - STD - 4B2201HX-STD

> ACL Race Series 4B2201HX-STD trimetal connecting rod bushes for MINI 4-cylinder engines. STD size, suitable for engine tuning and rebuilds.

- URL: https://www.gt2i.com/en/connecting-rod-bearings/134952-acl-race-series-connecting-rod-bushes-mini-4-cyl-std-4b2201hx-std-3661768407707.html
- Reference: ACL-4B2201HX-STD
- Price: €103.00
- Brand: ACL
- Availability: out of stock

## Description

The ACL Race Series 4B2201HX-STD connecting rod bushes, featuring a trimetal construction, are designed for MINI 4-cylinder engines. In the lower engine assembly, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B2201HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
Type: Connecting rod bushes
Manufacturer: ACL
Range: ACL Race Series
Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
ACL Material: F781 (Race Series connecting rod bushes)
Manufacturer part number: 4B2201HX-STD
Dimension: standard dimension (STD)
Version: HX, increased oil clearance compared to the corresponding H version
Main engines: 4CYL
Manufacturers: MINI
Rod journal diameter (nominal dimension): 41.285 to 41.298 mm
Connecting rod top end bore: 44.971 to 44.983 mm
Maximum thickness at the top: 1.811 mm
Maximum width: 22.35 mm
Engine configurations compatible with ACL 4B2201HX-STD bearings
The engine types listed for this set include: 4CYL.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, controlled shell thickness, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

## Features

- Product type: Connecting rod bush
- Thickness in mm: 1,81
- Width in mm: 22,35
- First word type: Bearing
- Make (Engine): Mini
- Rod Journal Diameter in mm: 41,30
- Rod Journal Diameter in mm: 41,29
- Max. connecting rod bore in mm: 44,98
- Min. connecting rod bore in mm: 44,97
