Catcams camshaft Audi 1.8L 20v DOHC 239°/230°

Camshaft Catcams for Audi 1.8L 20v DOHC 239°/230°

The camshaft is a key part of your engine that will allow you to significantly increase the performance of your racing car.
When tuning, two characteristics of the camshaft shape can be modified: the valve lift and the valve opening angle (duration).
The higher the valve lift, the more air-fuel mixture is admitted into the cylinders, and therefore the more power is obtained at high rpm.
The more the valve opening angle is increased, the more a kind of air flow is created which favors the entry of the air-fuel mixture into the cylinder: this helps to get more air-fuel mixture into the cylinders and thus to obtain more power.

Catcams is a manufacturer of engine parts such as camshafts and everything related to them. Worldwide known and recognized, CATCAMS designs and manufactures its parts by analyzing each engine. They master both cast steel and mass-produced steel, and they choose the processes and treatments according to the targeted performances and the information and parameters of each engine. CATCAMS offers for each engine concerned, a range of several camshafts with different opening and lift. Thus, there is almost a camshaft by practice or by level of preparation sought.

You are preparing your car and you want to fit the best parts?
Do not hesitate, CATCAMS has what you need. Contact our consultants for more information or for personalized help.

How to use:

Opening degree at 0.1mm: 239 / 230°.
Degree of opening at 1.0mm: 210° / 200°
Max. valve lift Intake/Exhaust: 8.75 / 9.75mm
Lift at TDC Intake/Exhaust: 0.50 / 0.30mm
Cam wheel: /
Follower: OEM
Retainer: OEM
Outer spring: OEM
Inner spring: /