# One-piece brake rotors 410x36 for Porsche 911 (991) GT3, GT3 RS, and GT2 RS (2013–2019) – 718 (982) Cayman GT4 RS (2021+) with C

> Pair of Girodisc front brake rotors, 410 × 36 mm, part no.: D1-154. Replacement cast-iron brake pads for Girodisc floating rotors, compatible with Porsche 911 (991) GT3, GT3 RS, and GT2 RS with CCB (2013–2019); Porsche 718 (982) Cayman GT4 RS with CCB (2021+). Rotors not included.

- URL: https://www.gt2i.com/en/brake-rotor/224328-one-piece-brake-rotors-410x36-for-porsche-911-991-gt3-gt3-rs-and-gt2-rs-20132019-718-982-cayman-gt4-rs-2021-with-c-3666618856537.html
- Reference: GIRO-D1-154
- Price: €1,450.90
- Brand: GIRODISC
- Availability: out of stock

## Description

These Girodisc D1-154 alternative front brake pads (410 × 36 mm) allow you to replace the braking surfaces on the Porsche 911 (991) GT3, GT3 RS, and GT2 RS models equipped with carbon-ceramic rotors (2013–2019), Porsche 718 (982) Cayman GT4 RS models equipped with carbon-ceramic rotors (2021+), while retaining compatible hubs following inspection. These cast-iron rotors maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without hubs.
The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting limits stresses caused by differences in thermal expansion between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting configuration, cast material, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-154 rotors for compatible vehicles
Brand: Girodisc
PartNumber: D1-154
Position: front
Sizes (diameter × thickness): 410 × 36 mm
Vehicles and models: Porsche 911 (991) GT3, GT3 RS, and GT2 RS with carbon-ceramic rotors (2013–2019); Porsche 718 (982) Cayman GT4 RS with carbon-ceramic rotors (2021+)
Braking surface: cast iron
Packaging: pair of brake pads, one left and one right; rotors not included.
Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
Mounting hardware: new parts supplied with the kit; replace the entire track-to-cup mounting assembly during reassembly.
Part number for corresponding complete rotors: A1-154.
Internal ventilation: directional curved fins
Minimum thickness: 34 mm
Original rotor diameter: 410 mm
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D1-154
Porsche 911 (991) GT3, GT3 RS, and GT2 RS with carbon-ceramic rotors (2013–2019)
Compatibility and mounting requirements:
For original PCCB; at the front, use the brake pad shape designed for the cast-iron rotor version.
Use the brake pad shape from the Porsche 911 (991) GT3 with cast-iron brakes, which is shorter radially than the PCCB brake pad.
Porsche 718 (982) Cayman GT4 RS with carbon-ceramic rotors (2021+)
Compatibility and Mounting Requirements:
For original PCCB; at the front, use the brake pad shape for the cast-iron rotor version.
Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake Pads and Brake Systems for Compatible Vehicles
For sports or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed for high braking demands. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-154 for compatible vehicles
What are the sizes of the D1-154 pads for my vehicle? The part shown measures 410 × 36 mm and is mounted on the front axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new brake discs or new braking surfaces. Use a compound suitable for cast iron and your specific use. Use the Porsche 911 (991) GT3 brake pad shape for cast-iron brakes, which is shorter radially than the PCCB pad.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and running in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D1-154 Alternative Tracks
410 × 36 mm size for front braking on compatible vehicles.
Internal ventilation via curved fins to dissipate heat.
Alternative tracks to maintain a two-part mounting.
Left/right pair identified for mounting.
Compatible aluminum brake rotors are retained to maintain the benefits of the two-piece mounting on unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 410
- Position: Front
- Thickness: 36
