# One-piece brake rotors 356x28 - Toyota Yaris GR and Corolla GR (2020+)

> Pair of Girodisc front brake pads, 356 × 28 mm, part no.: D1-268. Replacement cast-iron pads for Girodisc floating rotors, compatible with the Toyota Yaris GR and Corolla GR (2020+). Rotors not included.

- URL: https://www.gt2i.com/en/brake-rotor/224276-one-piece-brake-rotors-356x28-toyota-yaris-gr-and-corolla-gr-2020-3666618856018.html
- Reference: GIRO-D1-268
- Price: €1,001.50
- Brand: GIRODISC
- Availability: out of stock

## Description

These Girodisc D1-268 alternative front brake pads (356 × 28 mm) allow you to replace the braking surfaces on the Toyota Yaris GR and Corolla GR (2020+) while retaining the compatible brake rotors after inspection. These cast-iron pads maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without brake rotors.
The curved internal cooling fins channel air through the disc to dissipate heat during repeated braking. The floating mounting reduces stress caused by thermal expansion differences between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact even when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting, cast iron type, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D1-268 rotors for the Toyota Yaris GR and Corolla GR
Brand: Girodisc
PartNumber: D1-268
Position: front
Sizes (diameter × thickness): 356 × 28 mm
Vehicles and models: Toyota Yaris GR and Corolla GR (2020+)
Braking surface: cast iron
Packaging: pair of rotors, one left and one right; discs not included.
Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with OEM rotors.
Mounting hardware: New parts supplied with the kit; replace the entire rotor-to-hub mounting assembly during reinstallation.
Part number for corresponding complete rotors: A1-268.
Internal ventilation: directional curved fins
Number of internal fins: 48
Minimum thickness: 26 mm
Original rotor diameter: 356 mm
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D1-268
Toyota Yaris GR and Corolla GR (2020+)
Each application is subject to its specific braking system, calipers, and any requirements for brake pads or spacers. Please verify these conditions before ordering.
Brake Pads and Brake System for Your Toyota Yaris GR and Corolla GR
For sports driving or track use, we recommend Endless, Pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed to withstand high braking loads. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing you to retain the vehicle’s brake calipers. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade hoses and a high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement Brake Pads for Toyota Yaris GR and Corolla GR Girodisc Rotors
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. The aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the fasteners, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D1-268 for Toyota Yaris GR and Corolla GR
What are the sizes of the D1-268 tracks for my Toyota Yaris GR and Corolla GR? The part shown measures 356 × 28 mm and is mounted on the front axle. The track height, mounting hardware, and bowls must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake calipers are not included.
Do I need to replace the brake pads on my Toyota Yaris GR and Corolla GR?Yes. Always install new brake pads with new rotors or new brake pads. Their shape and compound must be compatible with the D1-268 rotor and/or braking surfaces and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed from the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my Toyota Yaris GR and Corolla GR? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build an even ply. The PDF documents below detail mounting and break-in.
PDF Documents for Mounting and Break-in
We’ve included two PDF documents below: one guide for installing and breaking in the rotors, and one guide for installing new tracks on existing rotors. Consult the document that applies to your specific task before you begin.
Key Features of Girodisc D1-268 Alternative Track Brake Pads
356 × 28 mm size for the front brakes of your Toyota Yaris GR and Corolla GR.
Internal ventilation via curved fins to dissipate heat.
Alternative tracks to maintain a two-piece mounting.
Left/right pair identified for mounting.
Compatible aluminum brake rotors are retained to preserve the benefits of the two-piece mounting on unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 356
- Position: Front
- Thickness: 28
