# One-piece brake rotors for the rear brakes of Audi R8 (2007–2024) with or without CCB – Lamborghini Gallardo (2009–2012)

> Pair of Girodisc rear brake pads, 355 × 32 mm, part no.: D2-050. Replacement cast-iron pads for Girodisc floating rotors, compatible with Audi R8 without CCB (2007–2024); Audi R8 with CCB (2007–2024); Lamborghini Gallardo (2009–2012); Lamborghini Gallardo with CCB (2009–2012); Lamborghini Huracán LP580-2 & Evo RWD (2015–2024); Lamborghini Huracán with CCB (2014–2024). Rotors not included.

- URL: https://www.gt2i.com/en/brake-rotor/224233-one-piece-brake-rotors-for-the-rear-brakes-of-audi-r8-20072024-with-or-without-ccb-lamborghini-gallardo-20092012-3666618855585.html
- Reference: GIRO-D2-050
- Price: €1,078.50
- Brand: GIRODISC
- Availability: out of stock

## Description

Girodisc D2-050 rear alternative brake pads (355 × 32 mm) allow you to replace the braking surfaces on the Audi R8 without carbon-ceramic rotors (2007–2024), the Audi R8 with carbon-ceramic rotors (2007–2024), the Lamborghini Gallardo (2009–2012), Lamborghini Gallardo with carbon-ceramic rotors (2009–2012), Lamborghini Huracán LP580-2 & Evo RWD (2015–2024), and Lamborghini Huracán with carbon-ceramic rotors (2014–2024), while retaining compatible brake calipers after inspection. These cast-iron tracks maintain the floating mounting’s functionality and facilitate maintenance of a braking system subjected to repeated stress. Sold in pairs, without rotors.
The curved internal cooling fins channel air through the rotor to dissipate heat during repeated braking. The floating mounting reduces stress caused by thermal expansion differences between the rotor and the caliper housing and helps the rotor center itself between the brake pads, maintaining consistent contact even when hot.
New brake pads must be installed with new rotors or brake discs. Their shape and compound must match the mounting configuration, cast material, and intended use; follow the specific requirements for this part number and perform the prescribed break-in procedure.
Specifications for Girodisc D2-050 tracks for compatible vehicles
Brand: Girodisc
PartNumber: D2-050
Position: rear
Sizes (diameter × thickness): 355 × 32 mm
Vehicles and models: Audi R8 without carbon-ceramic rotors (2007–2024); Audi R8 with carbon-ceramic rotors (2007–2024); Lamborghini Gallardo (2009–2012); Lamborghini Gallardo with carbon-ceramic rotors (2009–2012); Lamborghini Huracán LP580-2 & Evo RWD (2015–2024); Lamborghini Huracán with carbon-ceramic rotors (2014–2024)
Braking surface: cast iron
Packaging: pair of brake pads, one left and one right; rotors not included.
Compatible rotors: rotors from the corresponding Girodisc kit; check by part number; not universally compatible with original equipment rotors.
Mounting hardware: new parts supplied with the kit; replace the entire track-to-cup mounting assembly during reassembly.
Part number for corresponding complete rotors: A2-050.
Internal ventilation: directional curved fins
Minimum thickness: 30 mm
Original rotor diameter: 355 mm
Manufacturing of main components: United States
Vehicles compatible with Girodisc part number D2-050
Audi R8 without carbon-ceramic rotors (2007–2024)
Compatibility and mounting requirements:
Excludes carbon-ceramic; 380 mm front disks with caliper spacers.
Audi R8 with carbon-ceramic rotors (2007–2024)
Compatibility and mounting requirements:
For vehicles equipped with factory carbon-ceramic brakes, using a Girodisc conversion kit to compatible cast-iron rotors.
Lamborghini Gallardo (2009–2012)
Compatibility and Mounting Requirements:
Second generation; 380 mm mounting with caliper spacers.
Lamborghini Gallardo with carbon-ceramic rotors (2009–2012)
Compatibility and Mounting Requirements:
For vehicles with factory-installed carbon-ceramic brakes.
Lamborghini Huracan LP580-2 & Evo RWD (2015–2024)
Compatibility and mounting requirements:
Vehicles equipped with cast-iron rotors; 380 mm mounting with caliper spacers.
Lamborghini Huracan with carbon-ceramic rotors (2014–2024)
Compatibility and mounting requirements:
For vehicles with factory-installed carbon-ceramic brakes.
Each application is subject to its specific brake system configuration, calipers, and any requirements for brake pads or spacers. Please verify these requirements before ordering.
Brake Pads and Brake System for Compatible Vehicles
For sports driving or track use, we recommend Endless, pagid Racing, or Ferodo DS Uno brake pads, whose compounds are designed to withstand high braking loads. Unless otherwise specified for the Girodisc mounting, the brake pad shape remains identical to the original, allowing the vehicle’s brake calipers to be retained. The choice of compound must be suited to the intended use.
For intensive use, we recommend compatible aviation-grade flexible hoses and high-performance brake fluid that meets the vehicle’s specifications, along with proper bleeding and fluid replacement. This recommendation complements the mounting, which is compatible with the original hydraulic system.
Replacement brake pads for Girodisc rotors on compatible vehicles
When the braking surfaces on your Girodisc rotors are worn out, replace them with alternative tracks compatible with your existing rotors. Aluminum rotors can be reused for up to three pad replacements, subject to their condition, inspection of the mountings, and compliance with mounting instructions. Always use a new mounting kit each time you replace the pads.
FAQ — Girodisc D2-050 for compatible vehicles
What are the sizes of the D2-050 pads for my vehicle? The part shown measures 355 × 32 mm and is mounted on the rear axle. The pad height, mounting hardware, and rotors must also be compatible with the mounting.
Is the product sold in pairs? Yes. It includes a left and a right component for the same axle. The brake shoes are not included.
Do I need to replace my vehicle’s brake pads?Yes. Always install new brake pads with new rotors or new braking surfaces. Their shape and compound must be compatible with the D2-050 track and/or rotor and the calipers. Then break in the rotors and pads according to the prescribed procedures.
How do I identify the left and right sides? Girodisc rotors come with a label attached to each rotor: LEFT for the left side and RIGHT for the right side, as viewed in the direction of travel. On a left-hand-drive vehicle, “LEFT” corresponds to the driver’s side and “RIGHT” to the passenger side. Follow these labels and the instructions. On models with curved internal fins, the rolling direction depends on this internal ventilation; the surface grooves alone are not sufficient to determine the side.
How do I break in this mounting on my vehicle? Follow the Girodisc procedure and the brake pad manufacturer’s instructions to build up an even transfer ply. The PDF documents below detail installation and break-in.
PDF Documents for Mounting and Break-in
We have included two PDF documents below: an instruction manual for installing and breaking in the discs, and an instruction manual for installing new tracks on existing bowls. Consult the document that applies to your specific task before you begin.
Key Features of the Girodisc D2-050
355 × 32 mm size for rear braking on compatible vehicles.
Internal ventilation via curved fins to dissipate heat.
Alternative tracks to maintain a two-part mounting.
Left/right pair identified for mounting.
Compatible with existing aluminum brake rotors to preserve the benefits of the two-piece mounting on unsprung and rotating masses.

## Features

- Product type: Alternative Track
- Diameter in mm: 355
- Position: Rear
- Thickness: 32
