AP-Racing clutch cover 200mm HiR 525Nm
Average shipping for this product 60 days
This AP Racing 200mm high performance clutch for single plate setup is made from billet aluminum, for optimal stiffness. Specially designed for Rallye and Off-road, this clutch as a low wear rate for increased reactivity. Plates diameter : 200mmRelea ...
AP-Racing clutch cover 200mm HiR 525Nm is part of the category : Clutch Disks
Questions?
mail Contact us by e-mail
phone or by phone at +33 4 67 13 88 10
Information : our customer service is fully operational and our delivery are guaranteed
€1,170.83 tax incl.
Tax included
AP-CP3871ACRV
CP3871ACRV
Product Details
This AP Racing 200mm high performance clutch for single plate setup is made from billet aluminum, for optimal stiffness. Specially designed for Rallye and Off-road, this clutch as a low wear rate for increased reactivity.
Plates diameter : 200mm
Release Load : 420daN
Nb of plates (not inc.) : 1
Mounting : Stack
Torque capac. : 525Nm
Disc thickness: 7,08mm (new) / 6,29mm (worn)
Rec. Release Bearings : CP34572 / CP34576 / CP345710
Products intended for the adaptation of vehicles, for competition purposes, may cause them to be prohibited their use on roads open to public traffic, insofar as they significantly modify the features of the vehicles as described in the official report, issued by the vehicle registration authority : noise, pollution, maximum speed, tire size, etc. Plates diameter : 200mm
Release Load : 420daN
Nb of plates (not inc.) : 1
Mounting : Stack
Torque capac. : 525Nm
Disc thickness: 7,08mm (new) / 6,29mm (worn)
Rec. Release Bearings : CP34572 / CP34576 / CP345710
AP-CP3871ACRV
Data sheet
- Supplier part number
- CP3871ACRV
16 other products in the same category:
-
AP RACING AP-Racing intermediate pressure plate for CP2606Plateau presseur intermédiaire 184mm pour embrayage CP2606, CP2125, CP2817 et CP2572 ... - AP RACING AP-racing clutch disk 184mm 1"x23-7.11 6 paddlesDisque d'embrayage 184mm rigide ceramétallique ...
- AP RACING AP Racing 184mm clutch disc 1.12x10-2.62AP Racing sintered circular rigid clutch disc diameter 184mm for dual disc clutch. The AP Racing clutch discs of 184mm have been developed for maximum performance.Disc diameter: 184mm Disc thickness: 2,62mmShaft pinion outer diameter: 10 teeth x 1.12 ...
- AP RACING AP-Racing master cylinder CP7855-92 0.75"This AP Racing 19.1mm master cylinder is a single-circuit, short-thrust high-efficiency cylinder. Attached by a spherical bearing and featuring a one-piece piston and pushrod, it offers a significant improvement in efficiency over traditional cylinde ...
- AP RACING AP-Racing main pressure plate 140mmThis high performance 140mm Main Pressure Plate fits the clutches AP Racing CP6013, CP6014 et CP6092. ...
- AP RACING AP-Racing main pressure plate 200G17-HiRx0.00The description of this product will be available soon.
- AP RACING AP Racing clutch disc 184mm 22.0x26-2.62AP Racing sintered circular rigid clutch disc diameter 184mm for dual disc clutch. The AP Racing clutch discs of 184mm have been developed for maximum performance.Disc diameter: 184mm Disc thickness: 2,62mmShaft pinion outer diameter: 22.0x26. Sinter ...
- AP RACING AP-racing clutch disk 184mm 29x10-7.11 BMW M3 E36 Groupe ADisque d'embrayage 184mm rigide ceramétallique ...
- AP RACING AP Racing 184mm clutch disc 25x14-7.114-paddle Cerametallic AP Racing clutch disc. The 184mm AP Racing clutch discs have been designed for maximum performance. Fits the Ford Fiesta R5 Evo models, on which you'll find a twin plate set up, with one CP8401-A036H (this one), and one CP8401- ...
- AP RACING AP-Racing clutch disk 184mm 1.00x23-7.113-paddle AP Racing clutch disc. The 184mm AP Racing clutch discs have been designed for maximum performance.Disc diameter : 184mmDisc thickness : 7,11mmExternal diameter of the shank pinion : 23 teeths / 1"Cerametallic buttons bonded to a steel disc ...
- AP RACING AP-Racing metal sprung sintered clutch disk 200mm 23.8x23x7.114-paddle sprung AP Racing cerametallic clutch disc with a diameter of 200mm.Disc diameter : 200mmDisc thickness : 7,1mmExternal diameter of the shank pinion : 23 teeths / 23.8mmCerametallic buttons bonded to a steel disc giving improved heat dissipa ...
- AP RACING AP-Racing main pressure plate for CP2606Plateau presseur principal d'embrayage 184 pour embrayage CP2116 et CP2606 ...
- AP RACING AP-Racing main pressure plate 184mmThis high performance 140mm Main Pressure Plate fits the clutches AP Racing CP7371, CP7372 et 7373. ...
- AP RACING AP-racing clutch disk 184mm 29.0x10-7.11The description of this product will be available soon.
- AP RACING AP-Racing intermediate pressure plate 184mmPlateau presseur principal d'embrayage 184 pour embrayage CP7382 et CP7392 ...
